PDA

View Full Version : Dipped skaven



elmir
07-03-2011, 07:14 AM
Hey folks

I've decided to start WHFB again with my favorite army: the skaven. However, I wasn't really going to paint this army to the highest standard I could achieve. That would be insane for a horde army with 200+ models, so I opted for a fast painting method using my airbrush and the medium (brown) tone of army painter's quickshade.

The first big unit has been finished. It's a 35 strong clanrat unit armed with spears. I had a go at taking a few decent pictures, but getting the focus spot on when you are dealing with such guargantuan units is always tricky. So I opted for a few closeups of individual models while they are in the unit, as well as a full unit shot that is kinda in focus... Although the lighting shifted a bit as I was turning the camera (as you can tell somewhat).

https://lh5.googleusercontent.com/-InKOeYjXLlo/ThAxopju0_I/AAAAAAAAAas/sDn0RkZG2D0/s800/DSC01542.JPG

https://lh5.googleusercontent.com/-XUdmSW20nrw/ThAxpA2EzhI/AAAAAAAAAa0/YQPlTjiZBYA/s800/DSC01543.JPG

https://lh5.googleusercontent.com/-ZVcwlCVc7Us/ThAxvgKmzdI/AAAAAAAAAbQ/v510jiM0TKE/s800/DSC01548.JPG

https://lh3.googleusercontent.com/-s34OhyxgQ_k/ThAxxNqu1zI/AAAAAAAAAbU/gX9fN1MCyxk/s800/DSC01551.JPG

elmir
07-03-2011, 07:14 AM
https://lh5.googleusercontent.com/-okwuItFdrJM/ThAxzoIeetI/AAAAAAAAAbY/kDmwMCSz5QM/s800/DSC01552.JPG

https://lh4.googleusercontent.com/--5cUYoe8QLU/ThAx21FkKaI/AAAAAAAAAbk/gGutsR9QZLI/s800/DSC01555.JPG

https://lh3.googleusercontent.com/-3tE2Ui0D-fM/ThAx3_vH90I/AAAAAAAAAbs/YNw7Emm6DnM/s800/DSC01557.JPG

https://lh4.googleusercontent.com/-wXPSM-PEp5I/ThAx7QYKKEI/AAAAAAAAAb4/c2LwpmheIP8/s800/DSC01560.JPG

elmir
07-03-2011, 07:15 AM
https://lh4.googleusercontent.com/-hsJzZRedoEA/ThAx8z5oAJI/AAAAAAAAAcA/j8cxweL-qCo/s800/DSC01562.JPG

That's one unit down! Only like 4 more to go...

Next one the workbench is a 45 strong unit of clanrats with handweapons that will be pushing my screaming bell (will be deployed in horde formation with 6 ranks deep).

OdinStormfist
07-03-2011, 05:52 PM
Very nice!

From start to finish how long did it take to paint that unit?

Lexington
07-03-2011, 10:56 PM
Damn, this is something. Very well-done.

I'm doing a Skaven army myself, and thinking this might be the way to go. Thanks for sharing!

elmir
07-04-2011, 02:48 AM
Very nice!

From start to finish how long did it take to paint that unit?

In this way, it's about an hour or 6-8 work I reckon.

Brass Scorpion
07-05-2011, 11:55 PM
Terrific work!

elmir
07-08-2011, 12:19 PM
Time for another update on the speedy stuff. Had a bit of a setback with my varnish going white (probably because I overplied it in some areas) on a few models. These ones did come out ok though, but still need some work on the bases and stuff.

Some piccies:

https://lh5.googleusercontent.com/-yaF-rD5bgds/ThdGxX7MrjI/AAAAAAAAAcg/UNjG1ZP8nCo/s800/DSC01572.JPG

https://lh6.googleusercontent.com/-3VBSBL9DclE/ThdGxWX13yI/AAAAAAAAAco/gempKKaff-c/s800/DSC01571.JPG

https://lh5.googleusercontent.com/-ofg-Dx-tkAw/ThdGyzxStdI/AAAAAAAAAcs/d4ciSyFtPo4/s800/DSC01573.JPG

https://lh4.googleusercontent.com/-MpvmGNgALyM/ThdG1qoSHKI/AAAAAAAAAc0/LgqjQwoErDs/s800/DSC01577.JPG

I opted for a reversed flame on this guy, and I think I'll be taking this route for all the warpstone fire in the force. It came out alright, as this is the first test model for it. Some modest OLS around the bannerpole on his back as well.

elmir
07-08-2011, 12:22 PM
Next up, is the ratogre. Again, some OLS around the chunk of warpstone in his shoulder.

https://lh4.googleusercontent.com/-hDZDrkgk37E/ThdG44eNutI/AAAAAAAAAdE/U1mD38jYyDo/s800/DSC01581.JPG

https://lh5.googleusercontent.com/-WL-KX6K5bz8/ThdG8bnggHI/AAAAAAAAAdM/3wf_aBvkz9A/s800/DSC01580.JPG

This one still needs some highlighting on the metal bits as soon as the varnish has settled on it. Both models still need static grass on the bases as well (I don't even go near models with static grass anymore untill the varnish has cured at least 24 hours: lesson learned the hard way in the past... :( )

Enjoy

elmir
07-18-2011, 09:09 AM
It's been a while since I actually finished something... :s

But that's more because I have been working on 2 things at once for this army. My piece de resistance of this army will be a clanrat unit of 45 rats with shields who'll be pushing a grey seer on a screaming bell. That'll make for a 10 wide unit with 6 ranks that will be unbreakable. Should be good on the field hopefully.

So, besides painting the rats to actually push the bell, I have been working on the bell as well... The bell got finished (although I may still do a second coat of dullcoat, some of the shine from the quickshade still hasn't been removed completely). So I took it out for a few pictures. Again, being such a massive model, regular macro mode on the camera doesn't seem to cut it anymore. I'm having to rely on manual settings, and that's always tricksy... At least to get good focus on the entire model.

https://lh3.googleusercontent.com/-qUi3xB5ARjo/TiRD8c2FwgI/AAAAAAAAAd0/c6iipOX6Ue0/s800/DSC01585.JPG

https://lh6.googleusercontent.com/-MPHJJKhM3M0/TiRD9ccAPFI/AAAAAAAAAeA/9l-IjyLXmBU/s800/DSC01588.JPG

https://lh4.googleusercontent.com/-ktXCCui5ROA/TiREATk2e9I/AAAAAAAAAeg/Fz98lRRJ0aw/s800/DSC01595.JPG

https://lh4.googleusercontent.com/-xwTqKYa8E5o/TiRG4va11TI/AAAAAAAAAfo/hvU-W3w110w/s800/DSC01602.JPG

elmir
07-18-2011, 09:10 AM
https://lh4.googleusercontent.com/-7YCvObbRyro/TiRG4g6VvDI/AAAAAAAAAfk/wHdXPWqVsUE/s800/DSC01603.JPG

I was actually quite pleased with how this turned out. It should be quite a nice unit when it's surrounded by a ton of rats...

Enjoy!

elmir
07-19-2011, 02:55 PM
Some better pictures:

https://lh3.googleusercontent.com/-V3eyKflPbmI/TiXLyQy8I9I/AAAAAAAAAgE/XpooRUQGB1Q/s800/DSC01607.JPG

https://lh4.googleusercontent.com/-5l_UCrJs6E0/TiXLyh1sJ2I/AAAAAAAAAgI/ls1IXVp95Ik/s800/DSC01611.JPG

https://lh5.googleusercontent.com/-n47jWeahZZQ/TiXLyulJt-I/AAAAAAAAAgM/uMjLT7Z76YE/s800/DSC01613.JPG

Macro photography is killing me... :mad:

Lexington
07-19-2011, 04:56 PM
Awesome. :D

Hey, question - what was your base skin color for the Skaven?

Chronowraith
07-19-2011, 06:23 PM
I have to say that I usually hate dipping models. Yours on the other hand make me want to try it out on my own rat hordes (well, that and the fact that I have around 900 models in my ever-growing horde).

Good job!

elmir
07-20-2011, 02:11 AM
Awesome. :D

Hey, question - what was your base skin color for the Skaven?

It was vallejo model color sand brown (arena brown in spanish I think). The trick is to use very light colors. It's silly how much darker that quickshade will make them. Everything will end up as if you had mixed some mid-dark brown color in the original color. It works for skaven though.


I have to say that I usually hate dipping models. Yours on the other hand make me want to try it out on my own rat hordes (well, that and the fact that I have around 900 models in my ever-growing horde).

Good job!

That's what made me grab the quickshade in the first place. I tend to use the "traditional painting" methods on all my other armies, but I wasn't going to do that with a horde like skaven. A lot comes down to color choice and a good varnish in the end. Dipped models shine like crazy before you hit them with the varnish (I used model masters dullcote, a brushed on variant of the infamous testor's dullcoat).

The models aren't actually dipped either. The quickshade was just applied with a big, old brush... That did give me more control on the spread of "the goop" all over the miniature.

I took some extra pictures btw, again... purely to experiment with lighting and camera settings:

https://lh4.googleusercontent.com/-f5nC1N9lfag/TiaHltnrGKI/AAAAAAAAAgc/ikuzoGOgASc/s800/DSC01689.JPG

https://lh3.googleusercontent.com/-9QKa0DKqnw8/TiaHlnguiII/AAAAAAAAAgg/RxrXAVMMPHI/s800/DSC01684.JPG

I know it's the same model all over again... But it's fascinating in it's own right to see how much pf a difference the picture quality can make... :D

Chronowraith
07-20-2011, 04:14 AM
I assume you did your lighting effects before applying the varnish?

I only ask because you seriously have me considering this for my skaven.

elmir
07-20-2011, 10:27 AM
The lighting effects were added after the dip was applied. The basic colors are aplied (grey, browns, beiges, metallics (who are given a coat of vallejo rust pigments),...) and then the model gets covered in the quickshade (aplied by brush).

Then everything that needs that typical high green contrast (scorpion green), is given a basecoat (this means all the warpstone and all the eyes). Then, it's covered in a green wash, and progressively highlighted by adding pure white to the scorpion green. I use my airbrush to aply the basecoat of the scorpion green. You'll often get some green onto the surrounding areas, but that's the point of the OLS to begin with...

After the green has been aplied, the whole model gets covered in the brush on dullcote. I don't see these models ever getting damaged while playing. The quickshade itself is a woodvarnish with supergloss finsih and it's given a rather thick coat of matt varnish (thicker then you'd get with a spray varnish anyway).

elmir
07-28-2011, 08:04 AM
Hello folks,

time for a rather big update. It's been one month since I first purchased my Island of Blood set to get back into fantasy, and I thought it was time to show what I managed to complete in exactly 1 month's time.

So I took a few shots of minor additions, like the packmaster to accompany the ratogres:

https://lh5.googleusercontent.com/-h_lulgd80ts/TjFp3mVN4pI/AAAAAAAAAhQ/vnkyipdbzNY/s800/DSC01699.JPG

And, slightly more work, was the second regiment of clanrats. These guys will be pushing the screaming bell. The unit consists of 45 clanrats with hand weapon and shield, deployed with the bell in a 10 wide, 6 deep formation.

https://lh4.googleusercontent.com/-buPoAbRLYdk/TjFqHchlxuI/AAAAAAAAAh0/_Zn0SSswAm4/s800/DSC01708.JPG

https://lh6.googleusercontent.com/-OWTNMWT2qXY/TjFqJgQGfAI/AAAAAAAAAh4/40bePI0db88/s800/DSC01709.JPG

https://lh4.googleusercontent.com/-yFpAJsJ7VLo/TjFqAiR4b9I/AAAAAAAAAhk/LXGD1bUzrv4/s800/DSC01703.JPG

I also found the time to make custom movement trays out of 2mm thick plasticard and some strips of balsa wood as you can see. I also made some for my first regiment.

elmir
07-28-2011, 08:11 AM
The first regiment was also spruced up a bit with another banner and by adding some glow effects to the musician. Seeing the second regiment, I thought it could do with a bit more "warpstone green".

https://lh5.googleusercontent.com/-NsF7nzQCdVQ/TjFqBApT5HI/AAAAAAAAAho/v4gOJyAVZ8w/s800/DSC01704.JPG

It's starting to look rather good when deployed as an entire army, there seems to be good consistency within the regiments, and the bright green is there to "distract" from the basic paintjob of the hordes of dull ratmen. So far, it works imo.

https://lh6.googleusercontent.com/-uFbxzcItAFk/TjFqNtGu0EI/AAAAAAAAAiA/h-QexfsuAYc/s800/DSC01706.JPG

https://lh6.googleusercontent.com/-AqiUM35aOy0/TjFprc6LWDI/AAAAAAAAAgw/jNFDSr7ydNw/s800/DSC01691.JPG

https://lh3.googleusercontent.com/-YlY58eKYNSE/TjFqQLj9P5I/AAAAAAAAAiI/4g3XZ6dFpVU/s800/DSC01712.JPG

Next up are 2 warplighting cannons and my first block of slaves. The warplighting cannons should be fun with lots of glow effects, but the slaves might turn out to be a bit "boring" because they don't have banners or anything flashy. I plan on using some gnoblar fighters as slaves however. Hopefully, that'll bring a bit more life to the regiments.

elmir
07-31-2011, 12:59 PM
And I'm already working on the other expansions: I'm currently doing the 2 warplightning cannons. The frame and cannon of one of them is done. All that remains now, is to to finish the crew. I took a few pictures of how the cannon turned out however for your viewing pleasure:

https://lh6.googleusercontent.com/--NDVIgAPENw/TjWlV2WJGZI/AAAAAAAAAjA/jGCqqAuLAl4/s800/DSC01713.JPG

https://lh3.googleusercontent.com/-QTQXAAzrZnA/TjWlYITZawI/AAAAAAAAAjQ/X5vkZEjRY-s/s800/DSC01719.JPG

https://lh4.googleusercontent.com/-ALJPkdJALOo/TjWlY8GvJ1I/AAAAAAAAAjU/usERGUm00oM/s800/DSC01721.JPG

https://lh3.googleusercontent.com/-gbkzKAxYwYA/TjWlZHQBq1I/AAAAAAAAAjY/oHvunZEV4-c/s800/DSC01720.JPG

elmir
07-31-2011, 01:02 PM
And a few close-up shots of the cannon itself:

https://lh3.googleusercontent.com/-RtSso9-zEWc/TjWlWU8s3lI/AAAAAAAAAjE/n-QOVRTqDw8/s800/DSC01716.JPG

https://lh3.googleusercontent.com/-jK3eKXoGowA/TjWlXJQ1K4I/AAAAAAAAAjI/ZxsXAuRkHnY/s800/DSC01717.JPG

This has been slightly roughly 3 hours of work, including cleaning, assembly, priming and painting. I reckon I can get the crew done in well under 2 hours of well, so it's still decently fast. I'm happy with how it's turning out, that's the most important thing though. :)

elmir
08-22-2011, 03:02 PM
Hey folks.

Sadly, I haven't really been able to get a lot of painting done on my rats lately... mainly because I have been a bit preoccupied by moving house.

BUT! I did find a lovely new place in wich a single room will be dedicated to my hobby. Today, I set out to get a bit of a "mini studio" setup going and I bought myself a brand new camera to play around with it and test it. Sadly, the lens I was planning to use for miniature photography wasn't in stock (prime lenses are getting out of fashion it seems), but that didn't stop me from using my kitlens.

Anyway, I bought 2 500Watt lightbulbs and a 90x90x90 cm lightbox popup tent. Here's a few shots of the setup:

https://lh4.googleusercontent.com/-rIAdb-kqyNs/TlK7ewdG_zI/AAAAAAAAAlA/XDcanzwUR2E/s800/DSC_0051.JPG

https://lh3.googleusercontent.com/-NwRh8-0WbBs/TlK7khgivWI/AAAAAAAAAlI/BEo14gZkOz4/s800/DSC_0053.JPG

The idea is to get a nice, even soft light within the box, allowing me to take snapshots at 100 ISO, with f-stops of 8 (or higher) and still have decent exposure time. So far, the results are pretty good. I forgot to buy a whitebalance card though... so the gimp had to assist me a bit to correct WB afterwards, but nothing too major.

Anyway, the shots it yielded are:

https://lh4.googleusercontent.com/-Zqc9WNf7KkQ/TlK6GxZ6kNI/AAAAAAAAAko/mpCIMqm5AYk/s800/Screamingbellhorde.JPG

https://lh3.googleusercontent.com/-whdX1ccwaQE/TlK6C-EtHEI/AAAAAAAAAkg/91Jf6_A-1ks/s800/Ratogres1.jpg

elmir
08-22-2011, 03:03 PM
https://lh6.googleusercontent.com/-vT06NC0U3YA/TlK6G7xEKyI/AAAAAAAAAkk/kbxCvQChLUE/s800/Spears1.JPG

And the now finished WLC:

https://lh6.googleusercontent.com/-V2asR8C5lZI/TlK6JmVZCoI/AAAAAAAAAkw/-x-ayAmnkfI/s800/WLC2.JPG

https://lh6.googleusercontent.com/-ZKK31S00DJQ/TlK6HhiBjZI/AAAAAAAAAks/f6JpijSpKRU/s800/WLC1.JPG

I'm going to check if I can get these into the gallery for higher picture quality then image tags. I'm quite happy with these first results... It'll probably require more experimenting to get the pictures just right.

Oh and yes! I did not iron the white background cloth yet. Sadly, I couldn't iron it at my new place yet.

Enjoy!

elmir
08-31-2011, 09:42 AM
Here's a few updates:

Like I said, I wasn't quite able to finish a lot this month due to moving house. But I did manage to finish these two little things:

My warlock engineer from the IoB set. This one is standard, but the next one is a conversion and will feature a doomrocket conversion as a backpack!

https://lh3.googleusercontent.com/-RPm2tWdY-WI/Tl5QnuIikFI/AAAAAAAAAmE/C5V8B2OEGeo/s800/WarlockFront.JPG

https://lh4.googleusercontent.com/-Xh3KbK7WIzY/Tl5QowJeIFI/AAAAAAAAAmM/uj1PO0lDbOw/s800/WarlockSide.JPG

https://lh5.googleusercontent.com/-ldm_7BQayk4/Tl5QoexNDZI/AAAAAAAAAmI/c9iaErpKU2w/s800/WarlockRear.JPG

And the first conversion of the army is also a fact. Minor conversion work, but quite essential to larger games: the battle standard bearer. The standard itself came from the doomwheel and the base is made up of greenstuff. This means he can actually stand inside a regiment! Also, it really does make him nice and visible. I tried tying him in with the screaming bell stone-work...

https://lh4.googleusercontent.com/-9XfNjKqlnvI/Tl5QmH-9ucI/AAAAAAAAAmA/zm1H3ByZpfg/s800/BSBFront.JPG

elmir
08-31-2011, 10:10 AM
https://lh5.googleusercontent.com/-VqtaHkPWbdk/Tl5QlxsPdbI/AAAAAAAAAl4/W8gdOPGxvkw/s800/BSBLeft.JPG

https://lh5.googleusercontent.com/-AjJzvkfp7jQ/Tl5QmFBCOqI/AAAAAAAAAl8/p96ZReNzxSc/s800/BSBSide.JPG

Enjoy!

PS: I opted for the black background on these shots to see how it would affect the white balance... Lemme know what you prefer: black or white background!

Deadlift
09-01-2011, 04:14 PM
PS: I opted for the black background on these shots to see how it would affect the white balance... Lemme know what you prefer: black or white background!

Lol dont give a stuff about the background tbh :p, I have been following this thread and honestly the simplistic yet totally jaw dropping army you are creating is wonderful. I just the love the glowing green effect and am going to be trying it out on my necrons. Great job mate......oh and yeah the black is better :D

fantasard
09-04-2011, 01:46 AM
awesome and brilliant...makes me very, very jealous: and wanting to start a Skaven army!

Dominic
09-04-2011, 03:25 AM
First of all, you're models are really good, the coherent effects works really well :D

How do you paint the lighting around the warpstone etc?

elmir
09-06-2011, 07:29 AM
That's done with my airbrush. The color I used for it is scorpion green. If you spray it at a correct angle, you can have easy OSL I find... :)

elmir
10-17-2011, 12:39 PM
Hey folks

Small update on this project. It's not exactly the latest thing I have been doing, but I never really got around to take any pictures of it... mainly because it's a bit of a "dull" update.

It'll be part of my skavenslave units. I bought a few boxes of gnoblars a while back, to flesh out my slaves. I wasn't going to buy 300+ clanrats just to get 150 slaves (the way GW advertises them), so these will have to be the next best thing. I will add extra skaven models in this unit (as soon as maelstrom gets around to actually shipping my order...)

But I took a few shots of the first 12 of them. This is a really speedy paintjob btw, so no stellar work:

https://lh6.googleusercontent.com/-8n-fvVtJWHI/TpxnCA6V5wI/AAAAAAAAA48/eAA4VEc94io/s800/DSC_0399.jpg

https://lh5.googleusercontent.com/-R33_ygSZgxo/Tpxm8RUj3JI/AAAAAAAAA40/SEcmN98_jNE/s800/DSC_0398.jpg

https://lh6.googleusercontent.com/-QjQ2WzRNpgI/TpxmvgdzYCI/AAAAAAAAA4k/-ngWalUmY1s/s800/DSC_0395.jpg

https://lh5.googleusercontent.com/-Ydwkw8rV0A0/Tpxm05f19BI/AAAAAAAAA4s/PcZVPhytqUA/s800/DSC_0396.jpg

elmir
10-17-2011, 12:44 PM
Oh, and there are these pics from my table blog as well, that mesh in with this army:

https://lh5.googleusercontent.com/-SnqjbZ5PTlE/TpWyRX1yCYI/AAAAAAAAAzc/oR9RKgykDLQ/s800/WarpstoneForest1.jpg

https://lh5.googleusercontent.com/-r54peH5Tzww/TpWySDq3scI/AAAAAAAAAzg/jaAap7HoRtc/s800/WarpstoneForest2.jpg

https://lh3.googleusercontent.com/-fL2kAcunQBY/TpWyS3UGc-I/AAAAAAAAAzk/MJQ6Dn8cWxQ/s800/WarpstoneForest3.jpg

I know I already showed these before, but they do deserve a spot in my skaven blog as well, mainly because the terrain will be made for their "home-town advantage"

Enjoy!

elmir
10-18-2011, 01:39 PM
I also have a little update for these guys. They won't be getting reïnforcements, but their hometown terrain did grow!

It's 2 craters made by warpstone meteors. I'm also making a board that has a strong skaven theme to it, painted with similar techniques as the skaven army itself.

https://lh5.googleusercontent.com/-s8-6rni4yic/Tp3MAjBJI7I/AAAAAAAAA5s/ClHFf64q7dY/s800/WarpstoneCraters.jpg

https://lh4.googleusercontent.com/-O6P-y8HXqWo/Tp3MInN0l1I/AAAAAAAAA58/bAxPspXdr9w/s800/WarpstoneCraters3.jpg

So the warpstone infested terrain is starting to grow in size! These were completely scratchbuild however, unlike the trees. The craters were bases around some polystereen core, covered in brick morter and some pebbles were added for more randomness. The warpstone chunks are cut from compressed polystereen and covered in 2 coats of PVA mixed with dark angels green... to get that cleaner, glossy finish (as opposed to the grainy surface of cut polystereen).

Hope you like it!

elmir
10-30-2011, 09:30 AM
Time for another small update.

I finished my first warpfire thrower. It's been painted with pretty heavy front OSL as if it were shooting a burst of flames.

https://lh4.googleusercontent.com/-W7ecAcr6aXg/Tq1r1fX5tpI/AAAAAAAABIA/SGtFImirEIg/s800/DSC_0547.jpg

https://lh3.googleusercontent.com/-4iWqF9IV5oc/Tq1r5ZME5FI/AAAAAAAABII/Qbav71ANe50/s800/DSC_0549.jpg

https://lh6.googleusercontent.com/-24LR14deiuA/Tq1r8VWbJ7I/AAAAAAAABIQ/XRR1HiKiDM4/s800/DSC_0550.jpg

https://lh4.googleusercontent.com/-mG3TX88Tte0/Tq1r_cuNmaI/AAAAAAAABIY/Hgl4HTY3U1s/s800/DSC_0551.jpg

See you soon for more updates.

elmir
10-30-2011, 04:50 PM
I have another update: The first of the skavenslave blocks has been finished. I finally got around to purchasing some steel wire yesterday, wich allowed me to finish the "overseers" in this unit. They have the ghettowhips (and it's an excuse to use armoured clanrats in the slaveblocks to flesh them out a bit).

https://lh5.googleusercontent.com/-2k-zPr4t4M0/Tq3SX1JEFcI/AAAAAAAABIg/fCD7XMUJ50Y/s800/DSC_0004.jpg

And a wip of a slight conversion I have been working on: a warlock engineer to carry around the doomrocket.

https://lh4.googleusercontent.com/-NeZVLX8I1DQ/Tq3ScJ7KFFI/AAAAAAAABIo/6im4G4i63lA/s800/DSC_0005.jpg


https://lh5.googleusercontent.com/-rVGdwlsL9vk/Tq3Sgy0MtWI/AAAAAAAABI4/E7-nvXYv4UA/s800/DSC_0007.jpg

Should be kind of fun to paint this one up.

Enjoy!

elmir
11-02-2011, 04:11 AM
And I got around to taking a few pictures of the army where it stands now at the 4 month mark:

https://lh5.googleusercontent.com/---kUxStvqKQ/Tq3Seq51TsI/AAAAAAAABJI/PA1PDkzd_WA/s800/DSC_0006.jpg

https://lh5.googleusercontent.com/-oQOAtk1KZOo/TrES7nFR5qI/AAAAAAAABJA/0UvMtKB2AYk/s800/DSC_0008.jpg

https://lh3.googleusercontent.com/-GOuGe-jXMGI/TrETDLyR3sI/AAAAAAAABJQ/x6PTbNajbro/s800/ArmySide2.jpg

https://lh3.googleusercontent.com/-96Ld2sEnO90/TrETGJtxzsI/AAAAAAAABJY/C1meLZvFhbI/s800/ArmySide.jpg