-
A Budding Neophyte:
Back in the days when the Blackadder was a budding neophyte he attempted to make a Plasma Blaster for a StormBlade variant. The result was of indifferent quality but I could not figure out a way to make the muzzle cowl long thin exhaust ports.
So today I was faced with the same problem ( Fortunately these are much bigger ) plus I have a wealth of experience to draw on so we shall see how I do.
[url]https://i.imgur.com/ekQR0U4.jpg[/url]
https://i.imgur.com/ekQR0U4l.jpg
I laid the groundwork for these ports and they take about five minutes each to replicate those in the screen above.
At this point we needn't worry about the length and the slight bowing of the 0.040 inch strips. I need 12 of these of exact length.
-
Bogged Down On Minutia
These bits are time consuming
[url]https://i.imgur.com/pelIe6R.jpg[/url]
https://i.imgur.com/pelIe6Rl.jpg
[url]https://i.imgur.com/dwzqeHN.jpg[/url]
https://i.imgur.com/dwzqeHNl.jpg
[url]https://i.imgur.com/a09Up8I.jpg[/url]
https://i.imgur.com/a09Up8Il.jpg
-
Disappointing:
To say the least but it's good to show your failures occasionally lest you become too full of yourself.
[url]https://i.imgur.com/7pkSCnG.jpg[/url]
https://i.imgur.com/7pkSCnGl.jpg
I think I am getting tired of replicating this weapon The above image of the er whatever this is and the image below which I thought would be so cool just didn't come out as I had hoped.
[url]https://i.imgur.com/NLDhzIT.jpg[/url]
https://i.imgur.com/NLDhzITl.jpg
With the two components installed and the elevation spool temporarily in place
[url]https://i.imgur.com/lkltQQE.jpg[/url]
https://i.imgur.com/lkltQQEl.jpg
I can only mutter "Meh!" Not even good enough for Gov'ment work.
Faa!
-
What I Meant By Disappointing: (I wasn't fishing for compliments) :D
I suppose I should explain what I meant by disappointing but something did not look right about the panels on either side of the muzzle and the five exhaust ports between the vertical coils. I researched a lot last night and finally found an image that shows where I went wrong. It is irritating that I did not perceive this earlier; D**n!
Note to Jabba,
I had considered clear rod and tubing for the coils including fluorescent weed whip monofilament but could not find a suitable diameter and clear filament made it look too toylike.
These are the best images I have managed to come up with and presumably they are very current as I don't recall seeing them before. The front view shows the heatsinks (Whatever) are slightly convex on either side of the muzzle and the muzzle itself is exquisitely detailed for my purposes Much better than any previous image.
[url]https://i.imgur.com/IW4MQlm.jpg[/url]
https://i.imgur.com/IW4MQlml.jpg
The rear image shows the five exhaust ports and demonstrates where my error lies. I have mine vertical and the actual ports are inclined toward the rear.
[url]https://i.imgur.com/o17orvM.jpg[/url]
https://i.imgur.com/o17orvMl.jpg
I'm still hoping to find detailed unpainted top and bottom images of both the muzzle area and the rear area aft of the coils; areas sorely neglected in images thus far. I also need a view of the back of the weapon.
-
In and Out of the Doldrums:
Yesterday I found myself dissatisfied with the progress of this construct. Today after finding what was the problem I'm optimistic about the progress.
Plus I found an image that shows the length of the Primary weapons at about 13 inches.
[url]https://i.imgur.com/EL8Ukgw.jpg[/url]
https://i.imgur.com/EL8Ukgwl.jpg
The SunFury as it is in the images at present without the rear components is 14 inches so the scale is correct as well.
[url]https://i.imgur.com/3YopBin.jpg[/url]
https://i.imgur.com/3YopBinl.jpg
-
Getting There:
What else can I say?
[url]https://i.imgur.com/jbx20fT.jpg[/url]
https://i.imgur.com/jbx20fTl.jpg
This is a labor intensive project...........
[url]https://i.imgur.com/WR4APDH.jpg[/url]
https://i.imgur.com/WR4APDHl.jpg
-
It's been said that the only reason that people go to Cockroach Races is to see a Cockroach crash.
By extension; the only reason people view my threads is to see me Frak up.
[url]https://i.imgur.com/ZLZmcDD.jpg[/url]
https://i.imgur.com/ZLZmcDDl.jpg
Well sorry to disappoint but it ain't gonna happen this day. Today is the first time I have aligned and imaged my Imperator and the never ending Plasma Blaster project together......
[url]https://i.imgur.com/6msMmTC.jpg[/url]
https://i.imgur.com/6msMmTCl.jpg
( Honest to the God Emperor )
[url]https://i.imgur.com/pBXee9X.jpg[/url]
https://i.imgur.com/pBXee9Xl.jpg
and it seems to be in the right ballpark scale-wise.
Omnissiah be Praised. Genuflect! Genuflect! Hail in Oates.
-
Time to Take Stock:
I've reached a point where I need to economize on the number of components to duplicate and for the past week I've been thinking of a way to save work on making redundant items and I believe I have come up with a way.
[url]https://i.imgur.com/ZeUtl3H.jpg[/url]
https://i.imgur.com/ZeUtl3Hl.jpg
The suspender arm disc was labor intensive especially if I have to make one for each weapon variant so below is a removable Mount Disc Component that I will be making for each of the two weapon arms which will facilitate rapid exchange of weapon types with the exception of the CC claw which i am given to understand is not a usual Emperor Titan Weapon anyway.
[url]https://i.imgur.com/lC2lwrG.jpg[/url]
https://i.imgur.com/lC2lwrGl.jpg
I included a scale on the top image, even though it is only 2/3 of it's ultimate dimension, for the convenience of those who have requested a size reference.
-
Weekend Update:
I had hoped to be further along in the rear mechanisms by now but I ran into a bit of a snag when I realized the the rear section of the weapon expanded further than the surface armour surrounding the mount disk. Since my gun is wider overall than the Warlord weapon I have decided to not expand this section unless I see the overall appeal of the Plasma Blaster is compromised.
[url]https://i.imgur.com/opWDHf4.jpg[/url]
https://i.imgur.com/opWDHf4l.jpg
Another modification is the rear mount must also be removable and be able to slip onto the mount disk assembly which should pose no problem but was something I had not anticipated.
[url]https://i.imgur.com/xFNOLgE.jpg[/url]
https://i.imgur.com/xFNOLgEl.jpg
Now that that is recognized I can proceed with the actual manufacture of the rear sections.
-
One Week Later:
It's been a busy week but I managed to fit in a bit of building. The biggest accomplishment is a second Arms Mount section for the other armament items.
[url]https://i.imgur.com/9yj9h3H.jpg[/url]
https://i.imgur.com/9yj9h3Hl.jpg
It is a source of irritation to me that each of these disc mount appendages seem dedicated to a particular weapon so hopefully I can circumvent this need for redundancy by making a generic disc and adding a discrete weapons module pack for each weapon I produce. The Discs are really time consuming to make.
[url]https://i.imgur.com/6MMTHmi.jpg[/url]
https://i.imgur.com/6MMTHmil.jpg
[url]https://i.imgur.com/axub5XT.jpg[/url]
https://i.imgur.com/axub5XTl.jpg
So above we have the Plasma Blaster modular assembly that slips together as two pieces and subsequently in the image below the sections installed on the Plasma blaster body......
[url]https://i.imgur.com/InJMOrY.jpg[/url]
https://i.imgur.com/InJMOrYl.jpg
[url]https://i.imgur.com/G4yHwBI.jpg[/url]
https://i.imgur.com/G4yHwBIl.jpg
Next the Meta Snail module...........