Arch and 1st toe joint assembly
So, I spent several productive hours finishing the foot assemblies for the Warhound. It' will take a couple posts to get all the pictures up so please scroll through...
There is one step you get to take before the planning kicks in. You need to collect all of the toe joints that connect directly to the foot arch. They have a large plug that will need shortened by about half so that the pieces fit flush. Once you trim the length, you need to drill holes for pins in each socket and plug.
http://i276.photobucket.com/albums/k...s/DSCN6646.jpg
http://i276.photobucket.com/albums/k...s/DSCN6648.jpg
All of these will be glued into the arch piece. I fitted mine squarely in each socket because the pose on this titan will be a straight forward motion pose. If yours will be turning or standing on irregular rubble or a wreck, only the central and rear sockets will seat squarely. The others will need to be rotated slightly to accomodate the positioning of the toe. Hold off on gluing these until your base is ready if you want the most realistic pose. Sorry, I won't be covering that in this how-to.
First toe joints glued in place...
http://i276.photobucket.com/albums/k...s/DSCN6649.jpg